Wall Mounting (Optional)
To obtain a
Four VESA screw holes
1.Verify that the Power button is turned Off, then disconnect the power cord.
2.Lay the LCD display face down on a towel or blanket.
3.Remove the Plastic Covers from the back of the LCD display.
4.Remove the 6 screws attaching the base.
5.Remove the Rubber Plugs from inside the four VESA screw holes.
6.Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm x 100 mm distance).
7.Attach the LCD display to the wall, following the instructions in the
ViewSonic VX2255wmb/VX2255wmh | 7 |