LTR-Net PROGRAMMER
4-10
March 1999
Part No. 001-2009-600
4.5.6 MODE SELECT
The Mode Select window places the repeater
either in the Normal mode, Test mode or Diagnostic
mode. In the Normal mode, the repeater operates as a
normal repeater. In the Test mode or Diagnost ic Mode
the repeater transmits a test word. This test word is
the Test Mode ID setup in the Repeater Information
(see Section 4.3.3).
C A U T I O N
While in the test or diagnostics mode the repeater is
"Busy", therefore it is important to place the repeater
in Normal mode when the Test Mode is no longer
required . Figure 4-23 MODE SELECT
Figure 4-24 TEST PROGRAMMING FLOWCHART
PA
Receiver
Exciter
TEST
Full Repeater
Adjust Switch Link
All Tests
Repeater Setup
Transmitter Test
Receiver Test
Transmit Audio/Data
Audio Data Adjust
Repeater Operations
4.6 TEST
Figure 4-25 TEST MENU
NOTE: Some screens may require scrolling down to
read the complete procedure.