Refrigerator Installation con’t | Viking BRTGK72SS instruction

REFRIGERATOR INSTALLATION (con’t)

Securing the refrigerators

24"

Locate and predrill 1/4” (.6 cm) holes in the first

3”

mounting board (supplied). Countersink the bolt

WALL BOARD

heads into the 2 x 4 board using a 1-1/8” (2.9 cm)

OR PLASTER

counterbore wood bit 1-1/4” (.6 cm) deep. Locate

2x4 MOUNTING

and mark 2 wall studs to mount the first 2 x 4 board.

ACCESS TO

BOARDS

Do not cover the electrical outlet (see “Site

Preparations” on p. 3).

LAG BOLTS

2. Bolt anti-tip mounting board securely to wall studs.

3. Predrill 1/4” (.6 cm) in second mounting board

(supplied). Countersink the bolt heads into the 2x4

board using a 1-1/8” (2.9 cm) counterbore wood bit

OTE:

1/4” (.6 cm) deep.

EFRIGERATOR IN A 24"

Attach flush to first 2x4.

EEP OPENING WILL BE

LUSH AT FRONT SURFACE.

If application does not have studs, mount to the wall

SE 1-1/2" THICK MOUNTING

using a minimum of four 1/4” (.6 cm) diameter

OARD. IF REFRIGERATOR

fasteners (not supplied). If cabinets are deeper than

TO PROTRUDE BEYOND

4", ADDITIONAL MOUNTING

24”, mounting board must be shimmed. The shim OARD THICKNESS IS

must be structurally secured to the mounting

EQUIRED.

board.

WALL STUD

LAG BOLT WITH EXTENDED SHAFT

NOTE: THE SPACE BETWEEN THE REAR OF THE

REFRIGERATOR CABINET AND THE CONDENSING UNIT ASSEMBLY HOUSING IS 3” (7.6 CM) DEEP. ADDITIONAL MOUNTING BOARDS MAY BE REQUIRED IF THE UNIT DOES NOT TOUCH THE BACK WALL OF THE ENCLOSURE.

LEVELING WHEEL BOLTS

LEVELING FEET

5.To avoid water line damage, verify water line is secure so refrigerator does not run over the water line when moved into opening.

6.Repeat steps above for second refrigerator.

Before moving the refrigerators in place, confirm the finished dimensions, electrical, and plumbing locations, minimum door clearances, and door panel installations are accurate (see pages 2, 3, & 4).

7.Position refrigerators in front of cutout.

8.Remove the top air grille assemblies from both of the refrigerators. (See illustrations on page 7)

a.Remove the center grille blades by lifting up and pulling forward.

b.Remove the grille/end cap assembly by removing the four (4) screws in each black air duct.

c.Remove the black air ducts by removing the eight (8) screws on the right hinge model and the seven (7) screws on the left hinge model. Save the air ducts for the 72” grille installation.

9.Verify operation by plugging power cord. Power

switch will be shipped in the ON position and showroom switch will be in the ON position. (If showroom switch is switched to the “OFF” position, showroom mode is engaged and power is shut off to the compressor. This mode is for showroom display only.)

BRTGK72SS specifications

The Viking BRTGK72SS is a premium battery-powered lawn mower designed for superior performance and eco-friendly operation. Featuring a robust 72V lithium-ion battery system, this model delivers impressive cutting power and extended runtime, making it suitable for both residential and commercial mowing tasks.

One of the standout features of the Viking BRTGK72SS is its innovative brushless motor technology. This motor not only provides more torque and efficiency compared to traditional brushed motors but also reduces wear and tear, ensuring a longer lifespan for the equipment. The result is a smooth and quiet mowing experience, which is both pleasant for the user and less disruptive to the environment.

The cutting deck of the BRTGK72SS is constructed from high-quality stainless steel, ensuring durability and resistance to rust and corrosion. With a generous 20-inch cutting width, this mower can tackle larger lawns quickly while providing a clean and precise cut. The model is equipped with a three-in-one cutting system, allowing users the option to mulch, bag, or discharge clippings, providing versatility for different lawn care preferences.

Ergonomics is another critical design consideration in the Viking BRTGK72SS. The adjustable handlebar is designed for comfort and ease of use, reducing strain during longer mowing sessions. The mower also features easy-to-reach controls, which enhance the user experience by allowing for quick adjustments without interrupting the workflow.

In terms of technology, the Viking BRTGK72SS incorporates smart features such as a battery management system that monitors the battery's health and performance. This technology maximizes efficiency and extends the battery life, ensuring that users get the most out of each charge. Additionally, the mower is equipped with LED indicators that display battery levels and operational status, providing users with real-time information about the mower's performance.

Safety is paramount in the design of the Viking BRTGK72SS, which includes features such as an automatic shut-off when the user releases the handlebar, preventing accidents caused by inadvertent operation.

With its combination of power, efficiency, and thoughtful design, the Viking BRTGK72SS is an excellent choice for anyone looking for a high-performance battery-powered lawn mower that prioritizes both user experience and environmental responsibility. Whether you're a homeowner or a professional landscaper, this mower stands out as a capable and reliable tool for maintaining a pristine lawn.

Viking BRTGK72SS installation instructions Refrigerator Installation con’t

Models: BRTGK72SS

REFRIGERATOR INSTALLATION (con’t)

BRTGK72SS specifications