Cleaning and Maintenance
Cleaning Brass Parts
All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.
Replacing the Light Bulbs
When removing bulbs use an oven mitt to protect your hand in case the bulb breaks.
Halogen Lights
1.Unscrew halogen bulb.
2.Replace the bulb with a 120 volt,
Infrared Heat Lamp
1.Unscrew infrared bulb from heat lamp socket.
2.Replace the bulb with an R40, 120 volt,
1 | 1 | 2 |
|
|
|
|
| 1 |
|
|
| |
|
|
| |
2 |
|
| 1 |
|
|
|
2
Product Care
Service Information
If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area.
Have the following information readily available.
•Model number
•Serial number
•Date purchased
•Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range Corporation at
VIKING RANGE CORPORATION
PREFERRED SERVICE
1803 Hwy 82W
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is ever required. The model and serial number for your hood is located behind the baffle filter on the left side panel in the lower right corner.
Model no. _____________________ Serial no. ________________________
Date of purchase _______________ Date installed ___________________
Dealer’s name __________________________________________________
Address ________________________________________________________
_______________________________________________________________
If service requires installation of parts, use only authorized parts to ensure protection under the warranty.
THIS MANUAL SHOULD REMAIN WITH THE HOOD FOR FUTURE
REFERENCE.
Product Care
14 | 15 |
