Before Using Your Refrigerator
To obtain the best possible results from your refrigerator, it is important that you operate it properly. This section tells you how to set the temperature controls, how to operate the features in your refrigerator, and how to save energy.
Using the power on/off switch (power interrupter switch)
The power on/off switch is located behind the top grille. It is used to turn the power to the refrigerator off when cleaning it or changing the light bulbs. The refrigerator is shipped with the power interrupter switch on.
To turn power off:
1.Remove center grille blade.
2.Press power on/off switch to the OFF position.
To turn power on:
1.Press power on/off switch to the ON position.
2.Replace center grille blade.
IMPORTANT: Be sure the power on/off switch is in the ON position after cleaning the refrigerator or changing light bulbs.
Using the showroom switch
The showroom switch allows electronic controls and interior lights to function independently of refrigeration system. Showroom switch is located behind the top grille to the right of the control panel. The refrigerator is shipped with the showroom switch in the run position.
Electronic Temperature Settings
The electronic controls are located behind the refrigerator door above the refrigerator section. Press Display On pad to activate control panel. All other pads except for Alarm Off pad, remain inactive until Display On pad is pressed. Once activated, pads remain programmable for at least 10 minutes.
Refrigerator and freezer controls are preset at the mid setting, (5 bars are displayed). Wait 24 hours after connecting power for refrigerator and freezer sections to reach this setting. After 24 hours, adjust controls as desired. 1 bar displayed is the warmest setting and 9 bars displayed is coldest setting.
•To adjust refrigerator or freezer temperature, press Display On pad then Ref Temp pad or Freezer Temp pad. Press Higher Temp pad or Lower Temp pad to adjust temperature setting 1 level at a time. Holding down Higher Temp pad or Lower Temp pad adjusts temperature more than 1 level at a time
Entry Tone
Entry tone is the “beep” heard when a pad is pressed and command is read and accepted.
•Deactivate entry tone by pressing and holding Display On pad for 3 to 5 seconds. Three short beeps indicate instructions were accepted.
•Activate entry tone by pressing and holding Display On pad for 3 to 5 seconds.
Max Refrigerator Mode
Showroom switch on - full cooling power to refrigerator.
Showroom switch off - no cooling in refrigerator (power only to lights and electronic controls).
Showroom switch
Power switch
Max refrigerator mode adjusts refrigerator temperature to the coldest setting for 10 hours. Then the refrigerator temperatures automatically return to previous setting.
•Activate max refrigerator mode by pressing Display On pad then Max Ref pad. Indicator light will glow.
•Deactivate max refrigerator mode before automatic reset by pressing Display On pad then the Max Ref pad.
8 | 9 |
