Viking F20398A warranty Freezer Features, Meat SAVOR/PRODUCE Drawer, Using the Automatic Ice Maker

MEAT SAVOR™/PRODUCE Drawer

As the MEAT SAVOR™/PRODUCE drawer glides forward on an inner and outer track, the lid raises for easy access of items. The MEAT SAVOR™/PRODUCE drawer holds extra-large deli trays, wine bottles, etc. The lid can also be removed and the drawer repositioned for tall items such as tiered cakes, flower arrangements, etc. The cover is not designed for use as a shelf when the drawer is repositioned.

To remove the drawer:

1.Roll drawer out to the stop.

2.Remove lid by lifting back to release hooks then pulling out. Remove drawer by lifting slightly.

3.Pull drawer out the rest of the way.

To replace:

1.Position drawer rollers behind the track roller.

2.Push drawer up and onto track. Slide drawer back slightly.

3.Replace cover by inserting hooks into drawer then placing back and front down.

4.Slide drawer back until it stops.

Freezer Features

Caution

To avoid damage to ice maker, observe the following:

•Do not force ice maker arm down or up past stop position. •Do not place or store anything in ice bucket.

Using the Automatic Ice Maker

The ice maker and slide-out ice bucket are not adjustable. The ice bucket slides forward for easy access of ice. The ice maker will not produce ice when the ice bucket is not in place. After the freezer section reaches normal temperature, the ice maker fills with water and begins operating. Allow 24-48 hours after installation before first harvest of ice. Discard the first 3 harvests of ice after initially connecting refrigeration to household water supply and after extended periods of non-use. The ice maker produces 7 to 9 batches of ice in a 24 hour period under ideal conditions.

16

After ice is formed, the ice maker drops ice cubes into the ice bucket. During ice production, the ice maker arm raises and lowers. When the ice bucket is full, the ice maker arm turns ice maker off. To manually stop ice production, raise the ice maker arm. A definite click is heard when proper position is reached. In

non-dispensing models, ice maker will not function unless ice bin is pushed all the way back into position.

Solving common ice maker problems

Problem	Possible Cause/Solution
Ice crescents attached at	This is normal. They break apart easily.
corners	Shake bin occasionally to keep cubes
	separated.
Ice maker will not operate	•On/Off lever is in the OFF (up)
or ice is not made fast	position. Lower lever to ON (down)
enough.	position.
	•Freezer is not cold enough. Adjust
	temperature controls and wait 24
	hours.
Off-taste or odor in ice	•New plumbing connections can cause
	discolored or off-flavored ice.
	Discard the first three harvests of ice.
	•Cubes are stored too long. Throw
	them away and make a new supply.
	•Food is not wrapped properly.
	•Freezer and ice bin need to be
	cleaned.
	•Water may contain minerals. A filter
	may be needed to remove them.
	17