Table of Contents
IMPORTANT– Please Read and Follow
Warnings & Important Safety Instructions _______________________________________________3
Dimensions (VGSU Professional) _______________________________________________________6
Specifications (VGSU Professional) _____________________________________________________7
Dimensions (DGSU Designer) _________________________________________________________8
Specifications (DGSU Designer) _______________________________________________________9
Cutout Dimensions _________________________________________________________________10
Cutout Dimensions (VGSU Cooktop over Single Electric Oven)___________________________11
Cutout Dimensions (DGSU Cooktop over Single Electric Oven) __________________________12
Clearance Dimensions (Proximity to Cabinets)__________________________________________13
Clearance Dimensions (Wood/Composite Overlay) _____________________________________14
Electrical & Gas Requirements _______________________________________________________15
General Information ________________________________________________________________17
Installation _________________________________________________________________________18
Optional Gasket Installation ______________________________________________________18
Gas & Electrical Connection ______________________________________________________18
VGSU Bracket Installation ________________________________________________________19
DGSU Bracket Installation ________________________________________________________19
Final Preparation ___________________________________________________________________20
Performance Checklist ______________________________________________________________20
Service & Registration _______________________________________________________________21
•Before beginning, please read these instructions completely and carefully.
•DO NOT remove permanently affixed labels, warnings, or plates from product. This may void the warranty.
•All local and national codes and ordinances must be observed. Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSI Z223.1
•The installer must leave these instructions with the consumer for local inspector’s use and for future reference.
Installation of any
In Canada: Installation must be in accordance with the current CAN/CGA B149.1 & 2 Gas Installation codes and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.
In Massachusetts: All gas products must be installed by a “Massachusetts” licensed plumber or gasfitter. A “T” type handle manual valve must be installed in the gas supply line to the appliance.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. ALWAYS read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the word “DANGER,” “WARNING” or “CAUTION.” These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death
CAUTION
Hazards or unsafe practices which COULD result in minor personal injury or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
2 | 3 |
