Doors & Drawer Removal Door & Drawer Removal

Doors & Drawer Removal

Door & Drawer Removal (cont.)

Remove and Replace Handles

1.Using a 3/32"or 1/8” hex wrench, loosen the two set screws located on the side of each handle.

2.Pull the handle straight out from the door. Make sure you keep the screws for reattaching the handles.

3.To replace the handles, reverse the directions.

Remove Doors and Hinges (cont.)

6.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the left-hand side door from the bottom hinge pin.

Note: Remove the hinge pin cover from the bottom hinge pin and keep it for later use. See Bottom Hinge graphic.

Replace Doors and Hinges

1.	Assemble the parts for the top hinge as shown
	in Top Hinge graphic. DO NOT tighten the
	screws completely.
2.	Replace the parts for the bottom hinge as
	shown in Bottom Hinge graphic. Tighten
	screws. Replace the refrigerator door.
	Note: Provide additional support for the
	refrigerator door while the hinges are being

Drawer Front Removal

Remove Doors and Hinges

IMPORTANT: Remove food and any adjustable door or utility bins from doors.

TOOLS NEEDED: 5/16", 3/8", 1/4" hex-head socket wrench, #2 Phillips screwdriver, and a flat- blade screwdriver.

1.Unplug refrigerator or disconnect power.

2.Keep the refrigerator doors closed until you are ready to lift them free from the cabinet.

Note: Provide additional support for the refrigerator door while the hinges are being removed. DO NOT depend on the door gasket magnets to hold the door in place while you are working.

3.Starting with the right-hand side door, remove the parts for the top hinge as shown in Top Hinge graphic. Lift the refrigerator door from the bottom hinge pin.

Note: Remove the hinge pin cover from the bottom hinge pin and keep for later use. See Bottom Hinge graphic.

4.Before removing the left-hand side door, disconnect the wiring plug located on the top of the top hinge by wedging a flat-blade screwdriver or fingernail between the two sections. See Wiring Plug graphic.

Top Hinges

A. Hinge Cover Screw

B. Top Hinge Cover

C. 5/16" Hex-Head Hinge Screws

D. Top Hinge

Bottom Hinges

A.Hinge Pin Cover

B.Bottom Hinge

C.Hinge Screws

Wiring Plug

	moved. DO NOT depend on the door gasket
	magnets to hold the door in place while you
	are working.
3.	Align the door so that the bottom of the
	refrigerator door aligns evenly with the top of
	the freezer drawer. Tighten all screws.
4.	Reconnect the wiring plug on top of the left-
	hand side refrigerator door.
5.	Replace the top hinge covers.

Remove and Replace Freezer Drawer

IMPORTANT: Two people may be required to remove and replace the freezer drawer.

Remove Drawer Front

1.Open the freezer drawer to full extension.

2.Loosen the four screws attaching the drawer glides to the drawer front. See Drawer Front Removal graphic.

Note: Loosen screws three to four turns. Keep the screws in the drawer front.

3.Lift drawer front upward and off the screws.

See Drawer Front Removal graphic.

Replace Drawer Front

1.Slide the drawer glides out of the freezer compartment. Insert the screws in the top of the drawer front into the slots in the drawer brackets. See Drawer Front Replacement graphic.

2.Pull the drawer brackets toward you to position the two screws in the bottom of the drawer front into the brackets. See Drawer Front Replacement graphic.

3.Completely tighten the four screws.

A. Loosen 4 Door Bracket Screws

Drawer Front Replacement

Viking F20872 manual Doors & Drawer Removal Door & Drawer Removal

Models: F20872