Viking VDB451SS, VDB451BK Cycle Data, Preparing Dishes, Before Operation, Option Restrictions

Cycle Data

		Recommended		Total	Total
	Cycle				Wash Time
		dish types/	Temperatures	water	(minutes)
	name	soil level		(gal.)	120F˚ (49C˚)
	Pots/	Heavily soiled	Main–145° F (63°C)	8.4	138
	Pans	pots, pans and	Rinse–150° F (66°C)		(min.)
		casserole dishes
	Normal	Normally soiled	Main–120° F (49°C)	4.25	110
	Wash	dishes	Rinse–140° F (60°C)		(min.)
Controls
	Light/	Lightly soiled	Main–125°F (51.7°C)	5.4	112
Product	China	china and crystal	Rinse–130°F (54°C)		(min.)
	Wash	dishware and	Rinse–135°F (57°C)	5.8	(min.)
	Fast	Lightly soiled	Main–130°F (54°C)		60
		glassware
	Rinse/	All dishware	Rinse	1.4	10
	Hold				(min.)

Note: Will perform properly if connected to “cold” water–50°F (10°C). Cycle times will be extended.

Note: All cycle times, temperatures and fills are approximate and are dependent on installation and environmental conditions.

Note: Heating delays to meet set temperatures may extend the cycle times.

Note: AirFlo™ Gentle Drying will add approximately one hour to the total cycle time.

Preparing Dishes

It is not necessary to rinse normal food soils off the dishes before putting them in the dishwasher, although larger solid particles, such as bones, seeds, skins, pits, and toothpicks should be removed.

If you are not going to run the dishwasher immediately after loading, it is best to rinse salty and highly acidic foods off stainless steel, silver, and silverplate flatware. Prolonged contact of foods—including lemon juice, salt, vinegar, mustard, mayonnaise, and salad dressings—with stainless steel can cause corrosion (pitting).

Before Operation

1.Load the dishes per recommended loading. See section on Loading Dishwasher.

2.Make sure there is rinse agent in the dispenser. Add rinse agent if needed. See section on Rinse Agent.

3.Add proper amount of detergent and pre-wash. See section on Dishwasher Detergent.

4.Push both top and bottom racks in.

5.Select the desired cycle and option(s).

6.Press “START”. The “START” symbol will illuminate to indicate the unit is ready.

7.Close the door tightly until you hear a click. Otherwise, the dishwasher will not start.

Option Restrictions

All options are not available for all cycles. Please note the following:

•The option “HI TEMP WASH” is not available with the “LIGHT/CHINA” or “FAST WASH” cycles.

•No options are available in the “RINSE/HOLD” cycle.

•The option “TOP WASH” is available only with the “NORMAL WASH” cycle.

•The option “SANITIZED 155°F RINSE” is not available with the “LIGHT/CHINA” or “FAST WASH” cycles.

After selecting the wash cycle and options, depress “START” button. The start symbol will illuminate. This merely means the machine is ready. Close the door securely within 4 seconds of pressing the “START” button.

Product Controls

12 13