Dirty Tank Is Full
While Wet Cleaning, you will see dirty water collected in the Dirty Tank. When the Tank is full, the white Float in the Dirty Tank will rise to the top, making a noticeable sound to let you know it is time to empty the Dirty Tank.
Tip:
While using the
When You're Finished
Emptying the Dirty Tank
Remove the Dirty Tank Lid. Dump the dirty water and debris into the sink, toilet, laundry tub or outside. Rinse the Tank out with warm water and replace it in the unit.
Tip:
If there are large pieces of debris in the water, you may not want to empty the Tank into your sink.
Checking The Filter
While the Dirty Tank is out of the unit, remove the Pleated Filter from the top of the Tank. Remove dirt and debris from the pleats by gently tapping the Filter over the wastebasket or outside.
The Pleated Filter can also be rinsed under water to clean.
NOTE: If the Pleated Filter is rinsed with warm water to clean, it is recommended to leave it out of the unit to air dry before placing it back in the unit.
Cleaning The Gentle Clean™ Brush or Pad
Gentle Clean™ Brush
Remove the Gentle Clean Brush from the unit and rinse under warm water.
Gentle Clean™ Pad
Remove the Gentle Clean Pad Card from the unit. Peel the Pad from the Pad Card and toss in the wash!
Removing Wet Cleaning Nozzle
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
Remove the Wet Cleaning Nozzle by pulling tab on right side of Nozzle. Rinse any dirt and grime off the Nozzle under warm tap water.
To replace the Wet Cleaning Nozzle, insert the 4 tabs along the bottom of the Nozzle Window first and gently snap the Wet Cleaning Nozzle back into place.
9
ug603_6719_5200E_305.indd 9 | 11/16/05 2:58:47 PM |
