Bissell 5200 Water & Formula are draining out from the Clean Tank, No suction, Troubleshooting

Storing The Flip-It

Your Flip-It can be stored Ready-to-Use, by leaving water and Formula in the unit. Be sure to remove wet Gentle Clean™ Pad before storing.

Tip:

If the Pleated Filter is rinsed with warm water to clean, it is recommended to leave it out of the unit to air dry before placing it back in the unit.

Troubleshooting

Water & Formula are draining out from the Clean Tank

Possible Causes		Remedies
1	Clean Tank black Cap & Insert are not on tight	1	Remove black Cap & Insert
			and attach tightly
2	Clean Tank black Cap & Insert are cross threaded	2	Remove black Cap & Insert
			and make sure it is
			screwed on straight
			and tightly

No suction

Possible Causes

1Filter may be dirty or clogged

2Wet Cleaning Nozzle may not be on properly

3Dirty Tank is full

4Filter is wet

Remedies

1Remove Filter from the Dirty Tank and clean

2Make sure Wet Cleaning Nozzle is on tight and snapped into place

3Empty Dirty Tank

4Make sure Filter is completely dry before placing back into the unit

Water is not flowing

Possible Causes	Remedies
1 Something is caught and clogging the air path	1	Unplug unit. Remove Wet
		Cleaning Nozzle and insert
		a blunt object into the
		air path to remove any
		potential clog
2 Clean Tank is not inserted properly	2	Remove Clean Tank and
		reinsert into the unit

10

WARNING:

To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.

ug603_6719_5200E_305.indd 10 11/16/05 2:58:48 PM