How To Use Your Flip-It Hard Floor Cleaner
Getting Ready
1.Remove the Clean Tank from the machine.
2.Unscrew the black Cap on the bottom of the Clean Tank and remove the Insert.
3.Filling the Clean Tank:
Fill with BISSELL Formula to the Formula fill
line and fill with water to the Water line. Replace the Insert and Cap Assembly. Place the full Tank back into the unit.
Inserting The Gentle Clean™ Brush or Pad
The first time you use your unit, the Gentle Clean™ Pad will be in the unit. Based on your flooring type and personal preference, you may want to change to the Gentle Clean™ Brush.
Cleaning Formula Section
Keep plenty of genuine BISSELL Hard and Wood Floor Cleaning Solutions on hand so you can clean when it fits your schedule. Always use genuine BISSELL cleaning formulas.
WARNING:
To Reduce the Risk of Fire and Electric Shock due to internal componet damage, use only BISSELL cleaning formula intended for use with the hard floor cleaner.
32 oz. | 32 oz. |
0482 | 0484 |
Tip:
When using a
Dry Gentle Clean™ Pad, you may want to get it slightly damp by squeezing the trigger to saturate the pad. This will aid in the flow of water and Formula
to clean sticky grime and spots.
Tip:
When plugging the unit in, make sure to hook the power cord into the Cord Clip. This will help guide the power cord when you flip from Dry to Wet Cleaning.
Tip:
Use only specially formulated BISSELL Hard and WoodFloor Cleaning Solutions.
7
ug603_6719_5200E_305.indd 7 | 11/16/05 2:58:46 PM |
