Cleaning and Maintenance
Brass Parts
CAUTION
All special ordered brass parts are coated with an epoxy coating.
DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.
Broiler Pan and Grid
Clean with detergent and hot water. For stubborn spots, use a soap- filled steel wool pad.
Oven Racks
Replacing Oven Lights
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
Clean with detergent and hot water. Stubborn spots can be scoured with a
WARNING
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock.
Product Care
1.Unsnap glass light cover using a screwdriver in the access groove.
2.Firmly grasp light bulb and pull out.
3.Replace with halogen bulb using volt and wattage requirements listed on glass cover.
4.Replace the light cover by snapping glass cover onto metal box.
5.Reconnect power at the main fuse or circuit breaker.
glass light
cover
access 
groove
light bulb
Product Care
36 | 37 |
