Unpacking your
DrawerMicro Oven™
•Remove all packing materials from inside the DrawerMicro Oven. DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the top of the appliance.
Sealing Surface
Important Notes to the Installer
•Read all of the Installation Manual before installing the DrawerMicro Oven.
Waveguide Cover
Oven Cavity
•Remove all packing material before connecting 
the electrical supply.
•Observe all governing codes and ordinances.
•Be sure to leave these instructions with the consumer.
Important Notes to the
Consumer
•Remove the feature sticker, if there is one. Check the drawer for any damage, such as misaligned or bent drawer, damaged drawer seals and sealing surfaces, broken or loose drawer guides and dents inside the cavity or on the front side of the drawer. If there is any damage, do not operate the appliance and contact your dealer or a VIKING AUTHORIZED SERVICER.
Keep this manual with your Use and Care Manual for future reference.
•As when using any microwave oven generating heat, there are certain safety precautions you should follow. These are listed in the Use and Care Manual. Read all and follow carefully.
•Be sure your DrawerMicro Oven is installed and grounded properly by a qualified installer or service technician.
E3
