6
operating instructions
1.Yourfoodprocessorfeaturesanextrawidechutesomostvegetablessuchassmaller
onions and potatoes will not need to be cut into smaller pieces since they fit in the chute.
2.Prepareyourvegetablesbywashingthemthoroughlyandpeelingthosethatneedthe
skin removed.
3.Ensurethefoodprocessoranditsaccessoriesarecleanbyfollowingthe“cleaning”and
“maintenance” sections of this manual.
4. Make sure your food processor is properly assembled. Please follow the instructions from
thesection“BEFOREUSINGYOURFOODPROCESSOR.”Beforeclosingthefoodchute
lid, food can be placed in the food chute area if a disc is being used.
5. Plug the power cord into an electrical outlet and turn the power on selecting “ ” or Pulse
“ ”. The food chute lid must be locked in place for the unit to run.
6.Oncethefoodprocessorison,placethevegetablesinthefoodchuteandusethefood
pusher to slowly drive them down.
7. By twisting the food pusher , it can be locked into the food chute so the pieces act as one
to push food down the food chute. If separate, the food pusher can be removed while
the unit is running to add liquids or smaller foods.
WARNING: NEVERUSEHANDSORFINGERSTOPUSHFOODDOWNTHEFOODCHUTE
ORTOCLEARTHEFOODCHUTE.ALWAYSUSETHEFOODPUSHERPROVIDED.
THE BLADES AND DISCS ARE EXTREMELY SHARP. USE CAUTION WHEN
HANDLING THEM.
CAUTION: Maximum running time for product is 3 continuous minutes.
USING CHOPPING BLADE:
1. Place the chopping blade over the drive shaft, rotating it slightly until it drops into place.
2.Attachthecoverontothebowlsothatthefoodchuteisinthefrontofthebowl(above
theswitchcontrol).Turncounterclockwiseuntilthecovertsintoplace.Thefoodchute
will be directly above and in line with the handle. Push down on the food pusher lid until
you hear it click , indicating that the cover is locked into place.
3.Plugthepowercordintoanelectricaloutlet.
4. Start processing by selecting “ ”orPULSE( ).
USING THE SLICING/SHREDDING /GRATING DISCS:
1. Place the attachment rod over the drive shaft rotating it slightly until it drops into place.
2.Selectwhichdisctouseaccordingtorecipeortaste.
3.Insertdiscontotheattachmentrodwiththebladeofyourchoicefacingupsincethediscsare
reversible.
4. Attach the cover onto the bowl so that the food chute is facing to left side of the bowl.
5. Turn counter clockwise until the cover locks into place.
6.Loadthefoodchutewithingredientsbeforeturningthefoodprocessoron.Alwaysusethe
food pusher to yield more evenly sliced or shredded foods.
7.Restthefoodpusherinthefoodchute.Switchuniton“”.Holdingthefoodpusherwithone
hand, and food chute in the other , push gently down on the food pusher . When finished, press
control button to the off “ ” position before removing cover.