Before Use:
Remove all packaging materials and any promotional labels or stickers from your Blender.
Be sure all parts (listed under Features) of your new appliance have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date.
Before using your VillaWare® Blender for the first time, remove any dust from shipping by wiping the base, cover, and controls with a damp cloth.
How To:
Jar Assembly
1 Turn jar upside down so the small opening is at the top.
2 Place sealing ring over jar opening.
3 Place blade into jar.
4Place threaded jar nut over blade and jar. Place the threaded jar nut on jar and turn it clockwise to tighten.
5Place jar assembly
onto base.
6Place ingredients into jar according to your recipe. For best results always add liquids first when blending.
7Place lid on jar.
8Make sure Knob is pointing to OFF position, then plug the power cord into a 120 Volt AC electrical outlet.
Note: Avoid contact with blades and moveable parts.
Speed Modes
• To blend | PULSE | OFF |
in High |
| |
|
| |
Speed, dial |
|
|
Control Knob |
|
|
clockwise to |
|
|
the farthest |
|
|
setting. |
|
|
•To blend in Medium
Speed, dial Control Knob clockwise halfway through the speed selection.
•To blend in Low Speed, dial Control Knob clockwise ¼ of the way through the speed selection.
•To Stop blending, turn left to “OFF”. The motor will come to a stop.
•You can move between speeds at any time while blending by turning the Control Knob left or right. The new speed will start without interruption.
•Turn Control Knob counterclockwise to the “PULSE” setting will give a momentary pulse at high speed. The motor will then stop when released.
To Use The Pulse Setting
The “PULSE” setting momentarily activates the blender at HIGH speed.
You may also continuously move the Control Knob to “PULSE”.
•To pulse, turn the Control Knob counterclockwise to “PULSE” to activate a momentary high speed. The blender will run at high speed as long as you hold the knob. The motor will stop when you release the knob.
Tips:
•Put liquids in the jar first, unless a recipe says otherwise.
•Crushing ice: Crush approximately
3 cups of ice at a time with 2 cups of liquid for optimal results.
•Do not remove the lid while in use. Remove filler cap to add smaller ingredients.
•This blender has been designed to gently process foods when operating at low speeds. If blades do not rotate during operation, simply choose a higher speed.
4 villaware.com | villaware.com 5 |
