Fig. 2.7 CABINET GRILLE
•Cut a rectangular inside opening with the 1/4” clearance inwards to the width and height of the cooling unit. By not going through, leave 1/2” lip inside at the wall to place the gaskets (see Fig 2.1 & 2.2).
•If top exhaust, cut another rectangular opening at the top of the cabinet to the length and width of the top exhaust.
•Make 2 holes at the ceiling to install the 1/4 inside diameter wood thread inserts (see Fig.2.1 & 2.4).
•Place the gaskets on the mounting lip sides (see Fig 2.2).
•If top exhaust, place another gaskets along the top exhaust at the top of the cooling unit (see Fig.2.3).
•Place the cooling unit to a flat and stable place.
•Then move it on the top of the wine rack temporally.
•Move the cooling unit towards the mounting sides and push to press the gaskets (see Fig 2.5).
•Fasten the 2 brackets and use 7/16” wrench to tighten the 2 screws (see Fig 2.6).
•Attach the exhaust and fresh air grille from the rear side of the cellar (see Fig 2.7).
-9 -
