Vinotemp VT-32BCSB manual Reversal Of Door Swing, W W W . V I N O T E M P . C O M

REVERSAL OF DOOR SWING

This beverage cooler is built with a reversible door. You have the choice of either opening it from the left or the right side. In order to reverse the opening direction of your door, please follow these simple instructions.

.

CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process.

1.Remove the top hinge assembly and keep for later use.

2.Remove the plug buttons from the upper left holes and transfer them to the uncovered holes at the right side. Be sure to press the plug buttons firmly into the holes.

3.Remove the door assembly and keep for later use.

4.Remove the right bottom hinge and left bottom hinge and install them on the opposite sides.

5.Re-install the door assembly with the door handle on the opposite side (Rotating the door assembly for 180°). Make sure the door assembly is properly aligned on the cabinet.

6.Re-install the top hinge assembly previously removed in step 1 on the opposite side and tighten the screws.

The process is now complete.

Note: 1. If desired, change the door swing before installation.

2.Please remember, do not power up the unit for 48 hours after cooler has been out of an upright position to allow the coolants to settle inside the compressor.

8 W W W . V I N O T E M P . C O M

S N 3 2 B C H D 1 7 V T - S 1