INSTALLATION INSTRUCTIONS
Before Using Your Appliance:
•Remove the exterior and interior packaging.
•Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
•Install the handle on the door.
Installation of Your Appliance:
•Use two or more people to move and install appliance. Failure to do so can result in back or other injury.
•Place your wine cooler on a floor that is strong enough to support it when it is fully loaded.
•Choose a
•The appliances are designed to be for
•For free standing installation, 1 inch of space for the back and ¼ inch for each side of the unit is needed. This allows the proper air circulation to cool the compressor and condenser.
•Even for
Cabinet Opening Dimensions (minimum)
Width | 24” |
|
|
Depth | 25” |
|
|
Height | 33” |
|
|
•The appliance must be installed with all electrical, water and drain connections in accordance with state and local codes.
•Make certain that the pipes are not pinched, kinked or damaged during installation. Check for leaks after connection.
1 7 6 3 1 S . S u s a n a R o a d , R a n c h o D o m i n g u e z , C A 9 0 2 2 1 | 9 |
info@vinotemp.com |
|