OPERATING YOUR WINE CELLAR

OPERATING YOUR WINE CELLAR

It is recommended that you install the wine cellar in a place where the ambient temperature is between 50°F and 80°F. If the ambient temperature is above or below recommended temperature, the performance of the unit may be affected. For example, placing in extreme cold or hot conditions may cause interior temperature to fluctuate. Internal range of 44-66°F may not be reached. The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on the upper, middle or lower section.

How to use the buttons on the Display Panel:

You can set the temperature as you desire by pressing the control panel buttons. There are two buttons on the panel “How to use the buttons on the Display Panel:” and “CARE AND MAINTENANCE” to adjust the temperature by 1°F between 44-66 °F.

You can turn the interior light on or off by pressing the “Cleaning your wine cellar” button.

CARE AND MAINTENANCE

Cleaning your wine cellar

Unplug the wine cellar and remove the bottles and shelves.

Wash the inside with warm water or a baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water.

The outside of the wine cellar should be cleaned with mild detergent and warm water.

MAINTENANCE OF YOUR WINE CELLAR

Moving your wine cellar

Remove all the bottles and shelves.

Securely tape down all loose items inside your wine cellar.

Turn the leveling legs up to the base to avoid damage.

Tape the door shut.

Be sure the wine cellar stays in the upright position during transportation.

12

W W W . V I N O T E M P . C O M

Page 12
Image 12
Vinotemp VT12TEDS2Z owner manual Operating Your Wine Cellar, Care And Maintenance, Maintenance Of Your Wine Cellar