Specifications

Viper model 150.2

RMS continuous power per channel, both chan- nels driven into 4 ohms from 20 to 20,000 Hz, with less than 0.08% Total Harmonic Distortion @ 14.4 VDC

RMS continuous power per channel, both chan- nels driven into 2 ohms from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC

RMS continuous power bridged into a 4 ohm load from 20 to 20,000 Hz, with less than 0.1% Total Harmonic Distortion @ 14.4 VDC Dynamic power rating (IHF-202 Standard) bridged into 4 ohms

Signal-to-Noise Ratio

Frequency Response

Damping Factor @ 4 ohm

Crossover

Bass Equalization

Input Impedance

Input Sensitivity

Output Impedance

Supply Voltage

Fusing and Power

Minimum Cable Requirements (AWG) (Per amp, trunk mounted)

50watts

75watts

150watts

200watts

Greater than 95 dB

20-20,000 Hz ± 0.5 dB

Greater than 200

Switchable high or low pass 12 dB/octave, continuously variable from 50 to 500 Hz

Switchable +8 dB, centered at 40Hz

20K ohms

Variable from 150 mV to 8 volt

2 to 8 ohms, stereo 4 to 8 ohms, bridged

10 to 16 VDC

20A

#12

Viper 150.2 manual Specifications

Models: 150.2

SPECIFICATIONS