ENGLISH

USER MANUAL

 

 

 

 

GENERAL INSTRUCTIONS

Specific warnings and cautions to inform about potential damages to people and machine are shown below.

DANGER!

Always disconnect the power supply cable when the machine is not in use, before performing maintenance procedures and before opening any access panel.

This machine must be used by properly trained and authorised personnel only. Children or disabled people cannot use this machine.

Do not wear jewels when working near electrical components.

Do not work under the lifted machine without supporting it with safety stands.

Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapours.

WARNING!

The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine malfunction or breakdown, grounding connection reduces the risk of electric shock.

The power supply cable plug must be connected to an appropriate outlet, which is grounded according to law in force.

Improper connection can cause electric shock. Consult a qualified technician to make sure that the outlet is properly grounded.

Do not tamper with the power supply cable plug. If the power supply cable plug cannot be connected to the outlet, have new grounded outlet installed by a qualified technician, according to the law in force.

Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown on the machine serial number plate, match the electrical mains voltage.

Regularly check the power supply cable for damages, cracks, cuts, etc. If the power supply cable is damaged, replace it immediately.

To avoid any risk, if the power supply cable is damaged, contact Viper Service Center or a qualified technician.

Do not pull or carry the machine by the power supply cable and never use the power supply cable as a handle. Do not close a door on the power supply cable, or pull the power supply cable around sharp edges or corners. Do not run the machine on the power supply cable.

Keep the power supply cable away from heated surfaces.

To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is plugged in. Disconnect the machine from the electrical mains when not in use and before performing maintenance procedures.

To avoid electric shock, do not expose the machine to rain or other bad weather conditions. Store the machine indoors, in a dry place.

Do not allow to be used as a toy. Close attention is necessary when used near children.

Use only as shown in this Manual. Use only Viper's recommended accessories.

Take all necessary precautions to prevent hair, jewels and loose clothes from being caught by the machine moving parts.

Do not leave the machine unattended without being sure that it cannot move independently.

Do not use the machine on slopes with a gradient exceeding the specifications.

Do not use the machine in particularly dusty areas.

While using this machine, take care not to cause damage to people or objects.

Do not bump into shelves or scaffoldings, especially where there is a risk of falling objects.

Do not put any can containing fluids on the machine.

The machine working temperature must be between 0°C and +40°C.

The machine storage temperature must be between 0°C and +40°C.

4

DF-100A-EU

14019E (1) 2010-12 A

Page 5
Image 5
Viper DF-100A-EU user manual General Instructions

DF-100A-EU specifications

The Viper DF-100A-EU is a cutting-edge drone designed for a variety of applications, including aerial photography, surveillance, and recreational use. Featuring a sleek and compact design, the DF-100A-EU combines advanced technology with user-friendly operations, making it an ideal choice for both enthusiasts and professionals alike.

One of the key features of the Viper DF-100A-EU is its high-resolution camera, capable of capturing stunning 4K video and 12MP still images. The camera is equipped with a 3-axis gimbal stabilization system, ensuring that footage remains steady and clear even during high-speed maneuvers. This feature is particularly beneficial for photographers and videographers looking to achieve professional-quality results in dynamic environments.

In addition to its impressive camera capabilities, the DF-100A-EU boasts a robust flight system powered by GPS and GLONASS satellite technology. This dual navigation system enhances the drone's positioning accuracy and stability, enabling it to hover steadily and return to its takeoff point with ease. The drone also features intelligent flight modes, such as Follow Me, Waypoints, and Circle Flight, providing users with various options for creative exploration.

Battery life is crucial for any drone, and the Viper DF-100A-EU does not disappoint in this aspect. With an advanced lithium-polymer battery, it offers flight times of up to 30 minutes on a single charge, allowing users to capture a significant amount of footage before needing to recharge. The drone's quick-release battery design also makes it convenient to swap out batteries during extended sessions.

Safety features are paramount in the design of the DF-100A-EU. It is equipped with multiple sensors, including obstacle avoidance technology, which helps prevent collisions with obstacles in the drone's flight path. Additionally, the drone has an automatic return-to-home function that activates in low battery situations or when the connection to the remote controller is lost.

The Viper DF-100A-EU is controlled via a dedicated remote controller, featuring an easy-to-read LCD screen that displays critical flight data such as altitude, speed, and battery status. The drone can also be paired with a mobile app for enhanced features such as live video streaming, customization settings, and firmware updates.

Overall, the Viper DF-100A-EU stands out for its combination of state-of-the-art technology, ease of use, and impressive features, making it an excellent choice for anyone looking to venture into the world of drone flying.