USER MANUAL
ENGLISH
Fig. 4
BRUSH/PAD CLEANING
CAUTION!
It is advisable to wear protective gloves when cleaning the brush/pad because there may be sharp debris.
1.Remove the brush/pad from the machine, as shown in Use chapter.
2.Clean and wash the brush/pad with water and detergent.
3.Check the brush bristles for integrity and wear; if necessary, replace the brush.
4.Check the pad for wear; if necessary, replace the pad.
SOLUTION/CLEAN WATER FILTER CLEANING
1.Drive the machine on a level floor.
2.confirm the machine is unplugged
3.Remove the transparent cover(D),then remove the filter strainer(B).Clean and install them on the support(A).
NOTE
The filter strainer(B) must be correctly positioned on the housing(E) of the support(A).
FANG 18C |
13
