Viper MF-105B warranty Appendix B Moog MuRF Pattern Step Adaptor Sold separately

APPENDIX B: Moog MuRF Pattern Step Adaptor (Sold separately)

What it is:

The MuRF Pattern Step Adaptor is a female to male 1/4” adaptor that attaches to your Moog (FS-1) footswitch cable and plugs into the tap/step input allowing the user to manually “step” through the patterns generated by the sequencer.

Here’s how it works:

1.Attach the Pattern Step Adaptor to the Moog FS-1 footswitch.

2.Connect the Pattern Step Adaptor end into the Tap/Step Input jack

3.Start Playing. Rate is controlled by the RATE Control knob.

4.Click the footswitch or send a gate signal. The cycling of

the pattern will stop and each subsequent footswitch tap or gate signal will advance to the next step in the pattern, allowing you to manually step through the pattern.

5.To disengage this feature, move the RATE control knob to restore the Bass MuRF to automatic cycling through the patterns.

What is it good for:

-Advance the steps of the pattern by foot or gate signals to create your own variations.

-Use the pattern step adaptor as a clock input, bypassing the tap tempo calculation.