Assembled CD-ROM Box Enclosure | VIPowER VP-6028, VP-6049, VP-6023

6.Align the cover’s mounting holes with the mounting holes on the drive rails and secure with four screws (two on each side).

7.Replace the four rubber stands, one on each of the four corners. Orient each stand so the raised nub is on the bottom. These help heat dissipation and provide secure placement of the CD-ROM Box.

Assembled CD-ROM Box Enclosure

8.A vertical-holder stand is also provided as a convenient, space-saving method for setup of the CD-ROM Box Enclosure on your desktop. Simply align the grooves of the CD-ROM box with the guides on the stand and slide together.

CD-ROM Box Enclosure with Vertical-Holder Stand

The installation is complete and the CD-ROM drive is now ready to use with any Docking Kit.

CD-ROM Box Enclosure Installation Guide

5

Image 7

VIPowER VP-6028, VP-6049, VP-6023, VP-6020 Assembled CD-ROM Box Enclosure, CD-ROM Box Enclosure with Vertical-Holder Stand

Contents

CD-ROM Box Enclosure Table of Contents Introduction Disassemble the CD-ROM Box InstallationCD-ROM Box Enclosure Features Unpacking Your CD-ROM Box Assemble CD-ROM Box with CD-ROM Drive Power and Data Connector Drive ConnectionsCD-ROM Box Enclosure Components Installing Covers and Rubber Stands CD-ROM Box Enclosure with Vertical-Holder Stand Assembled CD-ROM Box Enclosure For models with Power Select switch Using the +5V/+12V AC/DC Power AdapterOperation with a Docking Kit Device is now ready to use Disconnecting the CD-ROM BoxConnections with Docking Unit for Operation