SCANNING INTERFACES 35
Scanning from OneTouch
Based on the recommended full installation of the scanner driver and the
Visioneer OneTouch software, OneTouch is your main scanning interface
for using the scanner. The OneTouch settings dial, on the scanner, shows
which scan settings will be used for scanning.
The OneTouch Button Panel, that you see on the computer screen, shows
the pre-set function for each button (such as eMail) and the icon of the
destination (called the Destination Application) where the images will be
sent when scanning is finished. In the example below, setting 1 will scan
and send the pages to PaperPort.
You can reconfigure the buttons to have new scan settings, for instance, to
send the scanned images to a different Destination Application. See the
section, “Configuring the OneTouch Buttons” on page40.
The OneTouch button panel shows which scan setting
will be used for scanning, in this case scan to PaperPort.