5USB SCANNER INSTALLATION GUIDE
CONNECTING THE SCANNER AFTER INSTALLING THE
SOFTWARE
Your USB scanner connects to any available USB port. Check your computer’s manual for the USB port location.
Note: You do not have to shut off the power to your computer when connecting the scanner.
To connect the USB scanner:
1.Plug the scanner end of the USB cable into the USB port on the back of the scanner.
If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection.
Note: If you have not installed the software yet, unplug the cable from the computer and install the software now. When the software installation is complete a message tells you to connect the scanner.