Visioneer 8100 manual About The Configuration Dialog Box

22VISIONEER ONETOUCH 8100 SCANNER INSTALLATION GUIDE

	ABOUT THE CONFIGURATION DIALOG BOX
	The Configuration dialog box shows the current settings for each
	scanner button.
	The tabs across the top of the dialog box correspond to the buttons.
	Clicking a tab shows the current settings for the corresponding button
	on the scanner.
	For example, the following figure shows the current settings for the
	Custom button because the Custom tab is selected. The Custom button
	is set up to scan the item with the configuration named Photograph for
	Editing, and then after the scanning is finished, to open Microsoft Paint
	to display the scanned image. The Format and Page(s) setting is to scan
	as a bitmap for a single page item.
		Click this
		tab to set
		preferences.
Select a software		Select a
application to		setting for
send the scanned		scanning
image to that		the item.
application.

Select format and page(s) options for the button.

See “Setting Preferences” on page 32 to set Preferences.