- 11 - Note: The Self – Timer delay is set to 10 seconds by default and it is
enough to put your image in the picture.
Using flash light
When you take pictures at night, indoors, or in gloomy conditions, please use the flash.
Press the button (◄) repeatedly to scroll through the flash options.
Flash Off: the flash is off. (Default)
Force Flash: flash fires regardless of the ambient
lighting conditions.
Auto Flash: the camera detects ambient lighting conditions,
and the flash fires if it detects insufficient light.
Press the Shutter button to take pictures after the blink finishes.
Note: 1. Do not use flash while recording.
2. Flash options revert to Off when VQ3010 is turned to off.
3. Do not cover the flash while using it.
4. The flash is deactivated when the camera is in (Macro mode) and
video mode.
5. Do not do any operation while the flash is charging.
Recording Video clips
a. Turn the power on.
b. The TFT will display image and symbols.
c. Slide the Function switch to (capture status).
d. Press the ► (MODE) button until appears on the TFT. (Video Mode)
e. Frame your subject through the TFT or viewfinder, and then press the Shutter button
to start recording.
f. Press the Shutter button again to stop recording.
Note: Flash is deactivated in the video mode.