Due to the difference of recipes, your results may vary.
See page 6 for information on Custom Programming these six buttons.
DISPLAYWINDOW - This area depending on what button is pressed,
displays a variety of operation messages. A‘Ready’
message appears when there is power to the machine.
OWNER CONTROLS - Acontrol panel accessible by pressing the Vita-Mix logo.
• Press once to reveal the mode message. Press button
1 then 6 within five seconds to continue. Once the correct
code is entered the display will indicate the motor
temperature (Norm, Warm, Hot), a usage count and a
total. The ‘count’is a machine usage total and can be
reset. This can be used to keep a count of the number
of drinks sold in a week, day or even an hour. To clear,
press and hold the START/STOPbutton for 5 seconds.
The ‘total’ keeps track of the machine usage, including
production and testing, and cannot be cleared.
• Press twice to reveal the name of the program control-
ling the PRE-SET buttons. If you are using the factory
settings this will read VITA-MIXBASIC PROGRAM.
• Press a third time to reveal an option to reset the
PRE-SET buttons to the original factory settings.
• Press a fourth time to exit and continue blending.
HIGH/LOW PULSE button - The pulse provides a quick increase or
decrease in speed of the blades when blending. Press H to increase the
motor to speeds that range from 51%-100%. Press L to decrease
the motor speed down to a range of 50% -7%. The PULSE button will
override the running program (as long as it is depressed). Once released
the original program continues its cycle.
• The PULSE high(H) and low(L) speed is set by using the SPEED
CONTROL buttons. To set, while pressing and holding a PULSE
button, press the SPEED CONTROL ▲ or ▼ button until the
desired motor speed is reached. The PULSE speed will remain at
this setting until changed again with the SPEED CONTROL buttons.
MODE
READY
TEMP COUNT TOTAL
NORM 25 100
VITA-MIXBASIC
PROGRAM
4 TOOVERWRITE
CURRENT PROGRAM
5