EN-27
. English .
User’s Manual
Projector
Language Menu
This menu enables you to select the language used in the OSD(on-screen display)
menus.
Changing settings procedure (using
either the Projector Control Panel or the
Remote Controller):
1.Press the MENU button to display
OSD menu.
2.Press the
or
button to select
LANGUAGE menu.
3.To enter the sub-menu setting, press the MENU button once again.
4.Press the
or
button to select the desired OSD language.
5.Press the
button to confirm the OSD language selection.
6.To exit from the current menu, toggle the MENU button.
Note:
This projector supports multilanguage.
Reset Menu
This menu allows you to restore all projector settings and adjustments back to the
factory defaults.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display
OSD menu.
2.Press the
or
button to select
RESET menu.
3.To enter the sub-menu setting, press
the MENU button once again.
4.Press the
or
to select YES if you
want to restore all projector settings to the factory defaults.
5.Press the
button to confirm the selection.
6.To exit from the current menu, toggle the MENU button.