Vivitar Vivicam 3715 user manual Setup menu, Format, Beep, Power off

Setup menu

You can select your preferences for the camera settings in SET-UP mode. Turn the mode dial to SET-UP mode and navigate to the option you wish to configure by using the / button.

Format

This option formats the internal memory (or memory card) and erases all stored images and data. To perform the format function, first press the button. Then select [Yes] by using the / button and press OK. A progress bar displays, showing the progress of formatting.

E Beep

The camera makes a sound (beep) each time you press the camera button if this function is enabled. Press the button. Select [On] or [Off] by using the / button and then press OK.

Power off

If the camera goes unused for a certain period of time while the camera is powered on, the camera will switch to an idle mode, and eventu- ally turn itself off to conserve power.

Inactivity period	Inactivity period	Camera status
(batteries)	(AC power adapter)
60 seconds	60 seconds	stay idle
30 minutes	30 minutes	shut off

If the camera is idle, re-activate the camera by pressing any button or switch the mode dial. If the camera has powered-off you must turn the camera on again by pressing the button. The table (above) shows the default time settings for idle, and power-off. To change the power saving interval, first press the button. Then select the power-off interval you perfer by using the / button and press OK.

[3 min], [5 min], [10 min], [30 min]

42