55
Reference
- Install the USB driv er be fore
you connect the camera to a
connecting to a computer with
Cannot transfer images after
USB cable. PC.
- Turn on the camera.
- USB driver is not install ed.
- Camera is turned off.
If the low-battery indicator
appears on the camera LCD
screen, replace batteries with a
subjects , use the camera to
Normal/Infinity focus mode.
- Hold the camera steady when
- Be sure that there is at least
80cm between t he camera
- Use the macro mode to shoot
close-ups images at a
- When shooting distance
- Turn your mode dial to Auto
mode or Manual mode.
- Wait until the flash charging
- Delete images you no longer
This c amera can not display
Set the flash to any other mode
appropriatedsett in g, NTSC or
- Please use the attached video
cable to connect the camera
- Set the video system to the
Recorded images are not
Images are nor displayed.
The flash doesn't fire.
Image not showing on TV.
saved in memory full set of new ones.
non-DCF images.
except Off .
to the TV correctly.
PAL for yo u r TV
complete.
the sav e operation is
Camera power d own before
A memory card with non-D CF
images rec orded with another
camera is loaded in the
camera.
The flash mode is set to Off.
- Ther e is a pr ob l em with the
camera-TV connection.
- Incorrec t video sys tem
setting.
Images are blurry or unfocused.
Image is not recorded when
the shut ter release button is
pressed.
shooting.
lens and the subject.
distance of 20cm.
- The camera wa s movi ng
can focu s.
range over which the camera
- The subjec t was out of the
when you took images.
finis hes
need.
- Memory is full.
- Flash is in charge.
Pl ayback mode.
- The mode dial is set to