DLP Projector – User’s Manual
Resetting the Lamp
After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:
1.
2.
3.
4.
Press the MENU button to open the OSD menu.
Press the cursor ŻŹ button to move to the Installation II menu. Press the cursor button to move down to Advanced.
Press the cursor źŸ button to move down to Lamp Hour Reset.
Press the cursor Ź or Enter button.
A message screen appears.
5. Press źŸŻŹ buttons to reset the lamp hour.
6. Press the MENU button to get back to Installation II.
– 42 –
