B. Frequently Asked Questions
Q What if I forget my password?
A After the Administrator's password has been assigned, every access to the Network Camera needs authentication. If you are one of the managed users, you have to ask the Administrator for the password. If you are the Administrator, there is no way to recover the root password except by restoring the factory default settings. Refer to Appendix A for the procedures.
Q Why can I not watch video from the Network Camera after it is authenticated? A There are many possible scenarios regarding this problem,
1.If you have just installed the Network Camera and are unable to watch the video, check if the heartbeat LED is blinking or the lens cap is off. If the heartbeat LED is dim, perform the software installation again.
2.If the Network Camera is well installed and you are accessing the Network Camera for the first time using Internet Explorer, adjust the security level of Internet Explorer to allow installation of
3.If the problem still exists after adjusting, and the message over the image window is showing "connecting", the network traffic may be too crowded.
4.It there is only “A” shown below the image, check the media options in client settings containing video.
Q What is the
A The
Q Why is the timestamp different from the system time of my PC or notebook?
A The timestamp is based on the system time of the Network Camera. It is maintained by a
- 59 -
www.vivotek.com
T: 886-2-82455282
F:
