Vivotek FD8134V, FD8133V user manual Event setting

VIVOTEK

7.24 Event setting

Group: event_i<0~2>

PARAMETER	VALUE	Default	SECURITY	DESCRIPTION
			(get/set)
name	string[40]	<blank>	6/6	Identification of this entry.
enable	0, 1	0	6/6	Enable or disable this event.
priority	0, 1, 2	1	6/6	Indicate the priority of this event:
				“0” = low priority
				“1” = normal priority
				“2” = high priority
delay	1~999	10	6/6	Delay in seconds before detecting
				the next event.
trigger	boot,	boot	6/6	Indicate the trigger condition:
	di,			“boot” = System boot
	motion,			“di”= Digital input
	seq,			“motion” = Video motion detection
	recnotify,			“seq” = Periodic condition
	tampering,			“recnotify” = Recording
	vi			notification.
				“tampering” = Tamper detection.
				“vi”= Virtual input (Manual trigger)
triggerstatus	String[40]	triggerstatus	6/6	The status for event trigger
exttriggerstatus	trigger,	<blank>	6/6	The status for event DI 1 trigger
	normal~trigger
	,
	trigger~norma
	l
di	<integer>	1	6/6	Indicate the source id of di trigger.
				This field is required when trigger
				condition is “di”.
				One bit represents one digital
				input. The LSB indicates DI 0.

50

User's Manual - 165