Vivotek IP7330 manual Parameter Value Security Description

					VIVOTEK
					for event/control transfer
joystick	<boolean>		0/7		Indicate whether to support the joystick
					control
Group: event_i<0~2>
PARAMETER	VALUE	SECURITY		DESCRIPTION
		(get/set)
name	string[40]	6/6		The identification of this entry
enable	0, 1	6/6		To enable or disable this event.
priority	0, 1, 2	6/6		Indicate the priority of this event.
				“0” indicates low priority.
				“1” indicates normal priority.
				“2” indicates high priority.
delay	1~999	6/6		Delay seconds before detect next event.
trigger	boot,	6/6		Indicate the trigger condition.
	di,			“boot” indicates system boot.
	motion,			“di” indicates digital input.
	seq,			“motion” indicates video motion detection.
	recnotify,			“seq” indicates periodic condition.
	tampering			“visignal” indicates video input signal loss
				“recnotify” indicates space for recording media is full
				“tampering” indicates camera tampering detected
di	<integer>	6/6		Indicate which di detected.
				This field is required when trigger condition is “di”.
				One bit represents one digital input. The LSB indicates
				DI 0.
mdwin	<integer>	6/6		Indicate which motion detection windows detected.
				This field is required when trigger condition is “md”.
				One bit represents one window.
				The LSB indicates the 1st window.
				For example, to detect the 1st and 3rd windows, set
				mdwin as 5.

User's Manual - 99