Vivotek IP7330 manual Group eventi0~2

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

	Rx,				the machine used. TX: server, Rx: receiver
	Both				box, Both: DVR?.
network_wire	<boolean>		0/7		Indicate whether to support the Ethernet
network_wireless	<boolean>		0/7		Indicate whether to support the wireless
derivative_brand	<boolean>		0/7		Indicate whether to support upgrade
					function for the derivative brand. For
					example, if the value is true, the VVTK
					product can be upgraded to VVXX.
					(TCVV<->TCXX is excepted)
evctrlchannel	<boolean>		0/7		Indicate whether to support the http tunnel
					for event/control transfer
joystick	<boolean>		0/7		Indicate whether to support the joystick
					control
Group: event_i<0~2>
PARAMETER	VALUE	SECURITY		DESCRIPTION
		(get/set)
name	string[40]	6/6		The identification of this entry
enable	0, 1	6/6		To enable or disable this event.
priority	0, 1, 2	6/6		Indicate the priority of this event.
				“0” indicates low priority.
				“1” indicates normal priority.
				“2” indicates high priority.
delay	1~999	6/6		Delay seconds before detect next event.
trigger	boot,	6/6		Indicate the trigger condition.
	di,			“boot” indicates system boot.
	motion,			“di” indicates digital input.
	seq,			“motion” indicates video motion detection.
	recnotify,			“seq” indicates periodic condition.
	tampering			“visignal” indicates video input signal loss
				“recnotify” indicates space for recording media is full
				“tampering” indicates camera tampering detected
di	<integer>	6/6		Indicate which di detected.
				This field is required when trigger condition is “di”.
				One bit represents one digital input. The LSB indicates
				DI 0.

User's Manual - 101