VIVOTEK
100 - User's Manual
Custom Command
If Custom Camera (scanner) is selected as the PTZ driver, you will need to congure command
buttons to control the PTZ scanner. Click Custom Command to open the Custom Command page
to set the commands in the Control Settings session. Please refer to your PTZ scanner user's
manual to enter the commands in the following elds. Click Save to enable the settings and click
Close to exit the page.
►The command buttons will be displayed on the main page:
►If you select DynaDome/SmartDOME,
Lilin PIH-7x00, Pelco D, Pelco P, or
Samsung scc643 protocol as the PTZ
driver, the Control Settings column
will not be displayed.
►For all PTZ drivers, a total of five
additional command buttons can be
congured.
NOTE: