Vivotek ND4801 user manual Setup Backup Schedule, Select Backup Target, Other Options

VIVOTEK

Setup Backup Schedule

f. Fill in a desired time and click >> to add the backup time. Please note that the backup time interval must not be shorter than 1 hour. For example, 23:40 and 00:15 are not allowed to exist simultaneously.

In the sample below, the server will backup the recorded data at 12:00 PM and 23:00 PM everyday once you save the settings.

f

NOTE:

The following diagram shows the backup schedule and backup data:

	1st backup		2nd backup		3rd backup		4nd backup
	data			data		data		data
Server
start		12:00		23:00		12:00		23:00
		2010/01/24		2010/01/24		2010/01/25		2010/01/25

Select Backup Target

g. Click Browse... to select a path (local path or network storage) to store the backup data. Please note that the disk for backup data should be different from the original recording path, or a warning message will pop up as shown below. For more information about how to set up recording path, please refer to page 84. Note that you should

not select disk C:\ or D:\ as the backup target. C:\ and D:\ are for system programs and database.

h. Select a maximum size for backup folder. The server will divide backup data into the following size: VCD (650M), DVD (4.7G), Customize, or Unlimited size according to your choice.

i. Select Delete old backups if space is insufficient if you want to do cylic backup due to the limited size of the hard disk.

g h

i

j

Other Options

j. If you only want to backup the recorded data of events, select Backup only events and fill in the pre- and post-event time.

108 - User's Manual