VIZIO 60HZ E SERIES User Manual
38
Version 3/17/2010 www.VIZIO.com
Adjusting the TV Settings
If you did not set up your HDTV for DTV / TV channels using the Initial
Setup screens or if your setup has changed, you can do so from the TV
menu.
Press MENU/OK key to bring up the OSD menu, the default option is
TV. Select it by pressing either the MENU/OK key
The following options are available in the TV menu:
1. Input - This option allows to
select the input, it being either
DTV/TV, A/V, Component,
HDMI1, HDMI2, HDMI3, HDMI4, RGB and PHOTO.
2. Channels - This option allows to select the type of signal input, it
being either antenna signal (over the air) or direct cable service (no
a set-top box).
3. Menu Language - This option allows selecting the language to
which it is preferred to have the OSD menu and instructions
available to you.
4. Date & Time – Allows adjusting the displayed time and date.
5. PC Settings – If the selected input is connected through RGB
(computer being used), this option allows adjusting of display to
accommodate the signal content.
Adjusting the Picture Settings
When viewing DTV / TV or an HDMI, Component, or AV source, the
following picture adjustment OSD screens are available when you
press MENU/OK button on the remote control.
Press ▲ / ▼ / ◄ / ► to highlight and select the choice, then press
MENU/OK key to select the desired adjustment, and then press the
EXIT key when finished making adjustments.