OPERATION |
|
| Accessories |
| ||
|
|
|
| Dynamic microphone (with talk switch) | ||
1. Press the power switch | and ensure that the power indicator | Microphone holder |
| |||
lights. (If the power indicator does not light, check the power cord |
| Mounting screw (4x16) |
| |||
for correct connection.) |
| Mounting bracket |
| |||
| Mounting screws |
| ||||
|
|
|
|
| ||
2. Insert the microphone plug into Mic 1 input jack |
| Hexagon bolt (M5×15) |
| |||
|
|
|
| Screw (M4×8) |
| |
|
|
| Nu | t | (M5) | |
3. Turn on the microphone switch and adjust the volume using Mic 1 | Spring washer (M5) |
| ||||
volumecontrol | When using Mic 2, connect the microphone to Mic |
| ||||
2 input jack | and adjust the volume with Mic 2 volume control | Spring washer (M4) |
| |||
Up to two microphones can be used per amplifier. |
| Plain washer (M5) |
| |||
|
|
|
|
| Plain washer (M4) |
|
4. When using a tape recorder or radio, connect the earphone terminal | Power cord (1.5m) |
| ||||
or LINE OUT terminal of the tape recorder, etc. to the auxiliary input | Speaker cable (0.3 m) |
| ||||
jack | by means of a shielded wire. Use the volume control of the | Fuse | ||||
tape recorder, etc. to adjust the volume.
To connect the amplifier to the tape recorder, use either a commercial "phone
Solder Hot and Cold in the shielded cable correctly so that they do not contact each other.
I SPECIFICATIONS
Model No. |
|
| CA130 | ||
PowerSource |
| Standard voltage: 14 VDC | |||
|
| Operating range: 10 - 16 VDC (12 V battery) | |||
Current Consumption | Under 2.7 A | Under 4.4 A | |||
|
| (rated output) | (rated output) | ||
Rated Output |
|
| 15W |
| 30W |
Distortion |
|
| Under 5% (1 kHz, rated output) | ||
Frequency Response |
| 100 Hz | |||
Input | Mi c | 1:600,4m | V | ||
|
|
| (Usable plug: | 6.3 mm phone plug) | |
|
| Mic 2: 600 | ,4mV |
| |
|
|
| (Usable plug: | 6.3 mm phone plug) | |
|
| Aux: | 10k | , 500mV |
|
|
|
| (Usable plug: | 6.3 mm phone plug) | |
Dimensions (mm) |
| 178(w)×50(h)×121(d) | 178(w)×50(h)×136(d) | ||
Weight |
|
| 0.9kg | 1.1 kg | |
|
| (amplifier only) | (amplifier only) | ||
Supplied Microphone | |||||
|
| (with talk switch) |
| ||
Impedance: 600 
Sensitivity:
Note : The design and specifications are subject to change without notice for improvement.
1
1
2
1
2
4
2
2
4
4
4
1
1
1
TOA Corporation
