Changing the Input Source
External devices such as DVD players,
5
Changing the Screen Aspect Ratio
The TV can display images in four different modes: Wide, Zoom, Normal, and Stretch. Each mode displays the picture differently.
To change the screen aspect ratio:
To change the input device:
1. | Press the MENU button on the |
| remote. The |
| displayed. |
2. | Use the Arrow buttons on the |
Input Source Selection |
TV |
1.Press the MENU button on the remote.
2.Use the Arrow buttons to highlight the Wide icon. Press OK.
| Screen Mode |
| |
Wide | Zoom | Normal | Panoramic |
remote to highlight the Settings |
icon and press OK. The TV |
Settings menu is displayed. |
3. Use the Up/Down Arrow |
buttons on the remote to |
highlight the input source and |
press OK. The Input Source |
Selection menu is displayed. |
4. Use the Up/Down Arrow |
buttons on the remote to |
highlight the input source you |
wish to display and press OK. |
AV |
Component |
HDMI 1 |
RGB |
Watch TV from your Antenna or Cable
3. Use the Arrow buttons to highlight your desired screen mode |
and press OK: |
• Normal preserves the content’s original aspect ratio. |
Since the 4:3 aspect ratio is not large enough to fill the |
TV’s screen, black bars are added to the left and right of |
the display image. |
• Wide stretches a 4:3 aspect ratio picture to the edges |
of the screen. Since the picture is being stretched, the |
display image may appear distorted. If the program |
is already formatted for widescreen viewing (1.85:1 or |
2.35:1), then black bars will appear on the top and |
bottom of the display image. |
• Zoom expands images with black bars to fit the screen. |
EXIT
• Panoramic expands the display image to fill the screen. |
Images may appear wider than intended. If you are |
watching widescreen (1.85:1 or 2.35:1) content, black |
bars will still appear on the top and bottom of the display |
image. This option is only available when the TV is |
displaying a 480i/480p source. |
21
