5
Adjusting the TV Settings for Use with A PC
Your TV can be used to display output from a home computer using the RGB port.
These settings are only available when viewing content from the RGB port.
To adjust the PC settings:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight the TV icon and press OK. The TV Settings menu is displayed.
3.Use the Arrow buttons to highlight PC Settings and press OK.
4.Use the Arrow and OK buttons to adjust each of the following options:
Horiz. Position - Adjust the horizontal (left/right) position of the picture.
Vertical Position - Adjust the vertical (up/down) position of the picture.
Fine Tune - Adjust the synchronization between the PC and the TV. Increase or decrease this setting if you see “waviness” or a blurry picture.
If you would like the TV to automatically adjust the picture for best quality, select Auto Sync and press OK.
E321ME
Using the Parental Controls
The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password.
Accessing the Parental Controls Menu
To access the Parental Controls menu:
1.Press the MENU button on the remote. The
2.Use the Arrow buttons on the remote to highlight Parental and press OK.
3.Enter your parental passcode. If you have not set a passcode, enter the default, 0000. The Parental Controls menu is displayed.
To set a custom parental passcode, see Changing the Parental Control Passcode on page 14.
Enabling or Disabling Program Ratings
To manage program content according to its rating, you must enable the Program Rating feature.
To enable or disable the Program Rating feature:
1.From the Parental Controls menu, highlight Rating Enable and press OK. The Rating Enable menu is displayed.
2.Select On or Off and press OK.
12
