Vizio E420I-B0 user manual Using the Network Connection Menu

Using the Network Connection Menu

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N.

Connecting to a Wireless Network

To connect to a wireless network whose network name (SSID) is being broadcast:

If your TV is connected to a network with an Ethernet cable, you will not see the wireless network connection menu.You must disconnect the Ethernet cable to set up a wireless network connection.

1. Press the MENU button on the

remote. The on-screen menu is
	VIZIO
displayed.
		Network
2. Use the Arrow buttons on the
	Wired Connection Disconnected
remote to highlight Network	Wireless Access Points
and press OK. The Network
menu is displayed.
3. If you do not see your wireless
network displayed, highlight
	More Access Points
More Access Points and press
	WPS
OK. The WIRELESS Access
	Manual Setup
Points menu, which is a list of
	Hidden Network
available wireless networks, is
	Test Connection
displayed.
4. Highlight the name of your
wireless network (this is the
network’s SSID) and press OK.
5. Using the on-screen keyboard,
enter your network’s password,
then highlight Connect and
press OK.

6. Press the EXIT button on the remote.

5

Changing the Manual Setup Settings

Advanced users can fine-tune the network settings using the Manual Setup feature.

To change advanced network settings:

1. From the Network menu,
	VIZIO
highlight Manual Setup and
press OK. The Manual Setup		Manual Setup
menu is displayed.	DHCP			Off
2. To change the settings	IP Address		____.____.____.____
manually, use the Arrow	Subnet Mask		____.____.____.____
buttons on the remote to	Default		____.____.____.____
highlight DHCP and then use	Gateway
	Pref. DNS
the Left/Right Arrow buttons to
	Server		____.____.____.____
change the setting to Off.	Alt. DNS
3. Use the Arrow and OK buttons	Server		____.____.____.____
	MAC		0:0:0:0:0:0
to adjust each setting:
	Save
• IP Address - The IP address
	Cancel
assigned to the TV.
• Subnet Mask - The subnet
mask.
• Default Gateway - Your
network’s default gateway
address.

•Pref. DNS Server - Your preferred domain name server address.

•Alt. DNS Server - Your alternate domain name server address.

4.Use the Arrow buttons on the remote to highlight Save and press OK.

5.Press the EXIT button on the remote.

34