SPECIFICATIONS
Specifications
Diameter: 380 mm
Rated Impedance
HLS38UL216 : 16
Power Handling Capacity *1 : 500 W continuous pink noise
Sensitivity *2 : 98 dB (1 W/1 m)
Frequency Range : 30 to 3,000 Hz
Highest Recommended Crossover Frequency : 1,000 Hz
Effective Piston Diameter : 330 mm
Displacement Limit
Minimum Impedance
HLS38UL216 : 16.0 ±10% (25 °C)
Voice Coil Diameter : 72 mm
Voice Coil Material : Edgewound copper ribbon
Voice Coil Winding Depth : 25 mm
Bl Factor
HLS38UL216 : 27.3 N/A
Effective Moving Mass : 0.090 kg
Flux Density : 16,000 gauss
Polarity : Positive voltage on plus (RED) terminal generates the positive sound pressure.
Front External Diameter : 407 mm
Diameter between mounting holes : 370 mm Baffle Cutout Diameter
Front Mount : 354 mm
Rear Mount : 350 mm Depth : 186 mm Loudspeaker Volume : 6 lit. Weight : 12 kg
Thiele-small Parameters
Fs : 40 Hz
Re
HLS38UL216 : 11.6
Qts : 0.26
Qms : 2.3
Qes : 0.29
Vas : 180 lit.
Sd : 0.086 m2
Xmax : 7.7 mm
Vd : 660 cm3
o(Half space) : 3.9%
Pe(Max) : 500 W continuous pink noise
Accessories | 8 each |
Screw/washer assembly and nuts |
*1 AES Standard (60 to 600 Hz)
*2 Based on a
Note: The design and specifications are subject to change without notice for improvement.
FREQUENCY RESPONSE
Frequency Response and Impedance Curve | Distortion Response |
Measuring Condition | Input signal: Sine wave of 50 W (1/10 of power handling |
Measuring environment: Anechoic chamber | capacity.) |
Measurement distance: 1 m on the forward axis |
|
Input signal: 1 W sine wave |
|
Enclosure: |
|
curve has been obtained by measuring |
|
the naked speaker.) |
|
TOA Corporation
Printed in Japan