Vizio M3D470KDE, M3D550KDE warranty IP Settings

To connect to a wireless network whose network name (SSID) is not being broadcast:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Network icon and press OK. The Network Connection menu is displayed.

3.Highlight Enter Access Point Name and press OK.

4.Using the on-screen keyboard, enter your network’s name

(SSID), then highlight Connect and press OK.

5.Using the on-screen keyboard, enter your network’s password, then highlight Connect and press OK.

6.Press the EXIT button on the remote.

5

Changing the Advanced Network Settings

Advanced users can fine-tune the network settings using the Manual Setup feature.

To change advanced network settings:
1. From the Network Connection
menu, highlight Manual Setup
and press OK. The Change	IP Settings
Settings menu is displayed.
2. Use the Arrow and OK buttons	0	0	0	0
	0	0	0	0
to adjust each setting:
• DHCP - (Dynamic Host	0	0	0	0
Configuration Protocol) This	0	0	0	0
setting must be turned Off	0	0	0	0
to change any of the other

settings.

•IP Address - The IP address assigned to the TV.

•Subnet Mask - The subnet mask.

•Default Gateway - Your network’s default gateway address.

•Pref. DNS Server - Your preferred domain name server address.

•Alt DNS Server - Your alternate domain name server address.

3.If you need the RJ45 (ethernet) MAC address or the Wireless MAC address to set up your network, these are displayed at the bottom of the Change Settings menu.

4.Press the EXIT button on the remote.

29