Denon 7942G manual Using Do Not Disturb, Press CFwdALL or Forward All, User Options Web Pages

Basic Call Handling

If you want to...	Then...
Set up Call Forward All on	Press CFwdALL or Forward All and enter a target phone number.
your primary line
Cancel Call Forward All on	Press CFwdALL or Forward All.
your primary line
Verify that Call Forward All is	Look for:
enabled on your primary line	•	The call forward icon above the primary phone number:	.
	•
		The call forwarding target number in the status line.
Set up or cancel call	1.	Log in to your User Options web pages. (See Accessing Your
forwarding remotely, or for a		User Options Web Pages, page 60.)
non-primary line	2.	Access your call forwarding settings (See Controlling Line
		Settings on the Web, page 68.)

Note When call forwarding is enabled for any line other than the primary line, your phone does not provide you with any confirmation that calls are being forwarded. Instead, you must confirm your settings in the User Options web pages.

Tips

•Enter the call forward target number exactly as you would dial it from your phone. For example, enter an access code or the area code, if necessary.

•You can forward your calls to a traditional analog phone or to another IP phone, although your system administrator might restrict the call forwarding feature to numbers within your company.

•Call forwarding is phone line specific. If a call reaches you on a line where call forwarding is not enabled, the call will ring as usual.

•Your system administrator can enable a call forward override feature that allows the person receiving your forwarded calls to reach you. With override enabled, a call placed from the target phone to your phone is not forwarded, but rings through.

Using Do Not Disturb

You can use Do Not Disturb (DND) to block incoming calls from ringing on your phone. Your system administrator enables DND for your phone.

When DND and Call Forward are both enabled on your phone, calls are forwarded and the caller does not hear a busy tone.

Your intercom lines still ring when DND is active.

Cisco Unified IP Phone 7962G and 7942G Phone Guide for Cisco Unified Communications Manager 6.1(3) (SCCP and SIP)