Lanier GX3000 manual Printing on Unregistered Custom Size Paper, Click Portrait or Landscape, 185

Printing

4.Click [Portrait] or [Landscape].

Select the orientation that matches the document orientation and feeding direction.

5.Click the [Setup] tab.

6.Check that the tray with the paper you want to print on is selected in the [Paper source tray:] list.

7.Make the necessary settings, and then click [OK]. The printer properties dialog box closes.

8.Check that the orientation selected in the [Setup] dialog box of the application is the same as that selected in step 4.

If it is not, make the correct setting.

9.Close the [Page Setup] dialog box of the application.

10.Create a file in the application.

11.In the printer properties dialog box, make the print settings for the printer selected in step 2, and then click [OK].

z

z

p.151 "Two Types of Printer Properties Dialog Box"

For details about [Custom Paper Sizes], see the printer driver Help.

Printing on Unregistered Custom Size Paper

Follow the procedure below to print on unregistered custom size paper.

1.Open the [Page Setup] dialog box from the application.

The [Page Setup] dialog box is usually opened by clicking [Page Setup...] on the [File] menu, but the method to open it may differ in some applications. Open the dialog box according to the application being used.

2.Open the printer properties dialog box from the [Page Setup] dialog box.

3.Click the [Print Settings] tab, and click [Custom Paper Sizes...] in the [Original size:] list. The [Custom Paper Sizes] dialog box appears.

If the dialog box type is Multi-tab, click the [Page Settings] tab, and click [Custom Paper Sizes...] in the [Original size:] list.

4.In the [Long edge:] and [Short edge:] boxes, enter values. To change the measurement unit, click [Measurement Unit...].

5.In the [Paper source tray:] list, select a paper tray.

6.In the [Paper Position in Tray] area, select a paper orientation.

7.Click [OK].

To register the paper size as a custom paper size, click [Open [Custom Paper Sizes]...].

8.Click the [Setup] tab.

9.Check that the tray with the paper you want to print on is selected in the [Paper source tray:] list.

10.Click the [Page Settings] tab.

11.Click [Portrait] or [Landscape].

185