Lanier GX3000 manual Printing on Thick Paper, Printer properties dialog box closes, 164

Printing

The printer properties dialog box closes.

11. Make print settings, and then click [OK].

z

z

z

z

To print in reverse orientation in the printer driver settings, select the [Rotate by 180 degrees:] check box on the[Page Settings] tab.

p.151 "Two Types of Printer Properties Dialog Box"

p.28 "Paper Handling Precautions"

p.31 "Printable Area"

Printing on Thick Paper

Follow the procedure below to print on thick paper and label paper. Thick paper and label paper are fed from the bypass tray.

z

z

Paper heavier than 157 g/m2 (297.6 lb.) is inserted into the bypass tray one sheet at a time. Paper lighter than that can be loaded into tray 1.

To use Paper lighter than 157 g/m2 (297.6 lb.), click [Plain] in the [Paper type:] list.

1.Open the printer properties dialog box from the application.

2.On the [Print Settings] tab, click [Thick] in the [Paper type:] list.

If the dialog box type is Multi-tab, click [Thick] in the [Paper type:] list on the [Setup] tab.

3.Make the necessary settings, and then click [OK].

4.Check the message, and then click [OK].

5.Slide the bypass tray guides into position according to the paper size.

164